| |
Liquid Rubber is the ideal coating for repairing or replacing your EPDM or sheet rubber roof. Liquid Rubber has the same chemical composition as EPDM but it will not chalk. Liquid Rubber can be applied directly over your present, weathered, EPDM or sheet rubber roof with no primer. You can achieve up to a 30 Mil dry film in one coat.
EPDM is a synthetic elastomer made by combining ethylene and propylene with a diene monomer attached. This polymer (when cross linked) is a very good moisture barrier, resistant to oxidation and UV degradation but its most important property is its ability to tolerate both low as well as high temperatures (form -62°F to 350°F). EPDM rubber is used exclusively for radiator hoses, freezer gaskets and low temperature seals, steam hoses, and rubber roofing membranes. It is also blended with other rubbers to improve their properties, A multitude of products are now better and last longer because of the contribution made by EPDM rubber.
- Liquid EPDM Product
- 2-Year Warranty
- Electrometric
- White or Black Same Price
- Keeps Structure Cooler
- FREE Shipping!
|
- One Coat, no primer
- Resists ponding water
- Coverage up to 46 Sq. Ft. Per Gallon
- Ultra Violet and Ozone stable
- Acid and alkali resistant
- Resistant to polar solvents
|
- Withstands ponding water even when not cured
- Adheres to metal, canvas, plywood, foam, cement, sheet rubber, other roof coatings, EPDM, steel, wood, roof tiles, concrete tiles, concrete roof decks and more!
- Excellent long term aging properties (i.e. retains its flexibility and elongation longer than other elastomer's)
- Very broad temperature tolerance range (-62°F to 350°F).
|
Technical Information, Product Application & Warranty
The unique combination of properties, which EPDM coating posses can be best utilized when they are applied to the exterior surfaces of stationary structures. Examples are:
- Roofs - Metal, rubber or thermoplastic membrane, fiberglass, urethane foam, cement tile and plywood.
- Metal Siding - Can be applied with little or no surface preparation as a one-coat finish on steel buildings
- Concrete Tanks - The excellent water proofing properties of EPDM will reduce or prevent spalling of the concrete in cold climates.
- Corrosive/Humid Environments - Exposed structural steel on the interior of industrial buildings with humid or corrosive environments can be coated with minimal surface preparation. Plating operations, smelters, concrete casting operations, dye works, and paper mills are just a few examples. High-density poultry and hog production operations are another good use to protect steel from the corrosive environment produced by the manure.
- Impoundments - Liquid EPDM coating is a good choice for exterior spill containment structures because of their excellent weathering and broad chemical resistance properties.
- Ponds & Fountains - Concrete fish ponds, fountains and reflecting pool are another good applications for EPDM. These are demanding applications where the unique properties of EPDM have a distinct advantage over other products.
|
